Description
‑ Power Supply: Powered by rack back‑plane bus, auxiliary 24 VDC for loop‑powered sensors
‑ Power Consumption: approx 8 W
‑ Mechanical Structure: Eurocard plug‑in board for Procontrol P13 rack, metal front panel, back‑plane bus connector, field signal terminal connector
‑ On‑board Resources: Multi‑channel signal conditioning circuit, 16‑bit A/D converter, channel diagnosis logic, back‑plane bus interface, self‑diagnosis unit
‑ Communication Interface: Internal flexible back‑plane bus to system CPU
‑ Galvanic Isolation: Galvanic isolation between field input channels and internal logic bus
‑ Input Signal Types: 4‑20 mA, 0‑20 mA, 0‑10 V, ‑10‑+10 V standard analog signals
‑ Number of Channels: 8 analog input channels
‑ Resolution: 16‑bit ADC conversion
‑ Accuracy: ±0.1 % full‑scale at 25 °C
‑ Status LED Indicators: Power, Module Fault, channel status LEDs
‑ Weight: approx 1.0 kg
‑ Collects multi‑channel analog current / voltage signals from field transmitters and sensors.
‑ 16‑bit high‑precision analog‑to‑digital conversion, converts continuous field physical signals into digital data for system CPU processing.
‑ Supports channel‑wise configuration, signal scaling and digital filtering function.
‑ Channel diagnosis: wire‑break detection, short‑circuit detection for current loop signals, reports fault status to CPU.
‑ Transmits measured values and channel diagnostic information to main processor via back‑plane bus.
‑ Module self‑diagnosis detects power‑supply abnormality, internal circuit fault and bus communication failure, reports fault status.
‑ Cannot work independently, must be installed inside Procontrol P13 rack and cooperate with CPU and power‑supply modules. 1MRB150022 R0002Y is specific hardware variant of 500AIM02 series; pin‑compatible with other 500AIM02 revisions, cannot interchange with other series I/O modules directly.
‑ Continuously monitors input channel status, module power supply and internal hardware health. Detected faults activate fault LED and send fault word to main CPU.
‑ No local numerical display; measured values, channel alarms and fault codes are read through system commissioning software or upper‑level HMI.
‑ Module hardware failure will lose analog measurement acquisition function; other system functions still run normally if CPU and power supply keep working.
‑ Back‑plane connector: connects to Procontrol P13 internal back‑plane bus for data exchange with CPU and other rack modules.
‑ Field signal terminal connector: connection for field analog transmitter wiring.
‑ Mounting: Plug‑in installation inside Procontrol P13 system rack
‑ Operating Temperature: ‑20 °C ~ +60 °C
‑ Storage Temperature: ‑40 °C ~ +70 °C
‑ Relative Humidity: 5‑95 %RH, non‑condensing
‑ Protection Class: IP20 (inside cabinet)
- 500AIM02 analog input module (1MRB150022 R0002Y)
Complementary parts: Procontrol P13 rack and back‑plane, system CPU module, rack power‑supply unit, field shielded signal cables, commissioning software.
‑ Power off the whole rack before inserting or removing this analog input module. Field analog signal wiring shall adopt shielded cables with single‑end shield grounding to suppress electromagnetic interference.
‑ For spare‑part replacement: Verify complete part number 1MRB150022 R0002Y. After replacement, confirm back‑plane bus identification, download channel configuration parameters, verify analog signal acquisition accuracy and channel fault‑reporting function.
‑ Module hardware fault causes loss of analog signal acquisition for related channels.
Generator‑transformer control cabinets in thermal / hydro power plants; ABB Procontrol P13 automation system; industrial spare‑part replacement for analog signal acquisition channel.
- Procontrol P13 system high‑precision analog input module, 8‑channel for standard 4‑20 mA / 0‑10 V field transmitter signals, 16‑bit ADC conversion.
- Built‑in wire‑break and short‑circuit diagnosis for each input channel.
- Galvanic isolation between field side and internal logic bus, good anti‑interference performance for power‑plant environment.
- Supports signal scaling and filtering, transmits measured values and diagnostic status to main processor over back‑plane bus.
- Standard Eurocard plug‑in rack‑mount structure, convenient installation and maintenance.
Reviews
There are no reviews yet.