Description
‑ Power Supply：Power supplied by Harmony rack back‑plane, 5VDC back‑plane logic power supply
‑ Mechanical Structure：Rack plug‑in module for Symphony Harmony rack；overall weight approx 0.30kg
‑ On‑board Resources：Optocoupler isolation circuit, signal debounce filter circuit, channel diagnostic circuit; no independent user program memory.
‑ Communication Interface：Internal rack back‑plane bus, communicate with MFP / BRC series controller.
‑ Galvanic Isolation：Partial channel group isolation, field‑side and system‑side electrical isolation, anti‑interference for industrial field.
‑ Core Function：16‑channel digital signal acquisition, contact status detection, signal filtering and debounce, channel fault diagnosis, upload field switch status to DCS controller.
‑ Protection：Channel over‑voltage input protection.
‑ Status LED Indicators：Module fault LED, 16‑channel individual status LED indicators.
‑ Weight：approx 0.30kg
‑ IMDSI02 owns total 16 digital input channels, divided into two groups of 8 channels. Support dry contact closure signal, 24VDC /125VDC /120VAC field switch input, collect equipment feedback, limit switch, interlock contact status signal。
‑ Built‑in hardware signal debounce filtering, avoid signal jitter caused by contact bounce. Convert field discrete signal into digital data, transmit to DCS controller via rack back‑plane bus.
‑ Realize channel state indication by front‑panel LED. Support module hardware fault diagnosis, fault alarm information upload to operator station.
‑ Must install on Symphony Harmony standard rack, match NTDI01 dedicated terminal unit for field wiring, cannot work independently.
Difference compared with IMDSI13：IMDSI02 is 16‑channel multi‑voltage grade digital slave input module; IMDSI13 is 8‑channel 24VDC fixed‑type digital input module.
‑ Real‑time collect field digital switch signals, transmit status data to upper‑level MFP/BRC controller.
‑ Detect module hardware failure; channel short‑circuit / overvoltage fault information upload to DCS system.
‑ No local logic processing function, all control logic calculation completed by upper‑level controller.
‑ Back‑plane：Rack internal back‑plane bus for data communication and module power supply.
‑ External interfaces：Connect field switches, relays and contact devices through matched NTDI01 terminal unit.
‑ Mounting：Plug‑in installation on Symphony Harmony standard rack
‑ Operating Temperature：‑20 ℃ ~ +60 ℃
‑ Storage Temperature：‑40 ℃ ~ +85 ℃
‑ Relative Humidity：5‑95 %RH, non‑condensing
‑ Pollution degree：Degree 2
‑ Protection Class：IP20, cabinet‑internal installation.
- IMDSI02 digital slave input module（3BSE008580R1）
Complementary parts: Symphony Harmony rack, NTDI01 terminal unit, MFP/BRC series controller, system rack power supply, field switches, contact relays.
‑ Insert module into correct slot of Harmony rack, fasten front‑panel captive screws, ensure reliable back‑plane connector contact.
‑ Field signal wiring must adopt supporting NTDI01 terminal unit, configure input voltage grade by terminal jumper, prevent wrong voltage burning module.
‑ Recommend power‑off operation for module replacement. After replacement, verify each channel input status and diagnostic function.
‑ Pay attention to input voltage range, do not access signal voltage beyond module specification.
Power plant, petrochemical, pulp‑and‑paper industry Symphony INFI90 DCS control cabinets; discrete signal acquisition spare‑part for Harmony system.
- ABB Symphony Harmony IMDSI02 digital slave input module (3BSE008580R1), 16‑channel multi‑grade digital input module。
- Support dry‑contact, DC and AC field switch signals, built‑in hardware debounce filter, optocoupler isolation for anti‑interference.
- Independent LED status indication for each channel, module hardware fault self‑diagnosis and alarm upload.
- Rack plug‑in structure, cooperate with NTDI01 terminal unit for field wiring, cabinet‑internal IP20 application.
- No independent control logic, belongs to INFI90 DCS I/O subsystem, data interaction via rack back‑plane bus.
- Discontinued legacy DCS spare‑part, used for old‑system maintenance and retrofit projects。
Reviews
There are no reviews yet.