Description
‑ Power Handling：high‑energy impulse absorption for generator rotor de‑excitation application
‑ Mechanical Structure：stacked disc‑type non‑linear resistor assembly, metal mounting brackets, insulating separation gaskets, bolt‑type terminal connection
‑ On‑board Resources：multi‑layer silicon‑carbide non‑linear resistance discs, metal electrode plates, insulating spacers, mounting support brackets
‑ Connection Interface：bolt‑on mechanical terminals for generator field circuit connection
‑ Core Function：rotor de‑excitation energy absorption, field winding over‑voltage clamping and suppression
‑ Working Principle：high resistance under normal operating voltage; resistance drops sharply under over‑voltage impulse to absorb large magnetic‑field energy; returns to high‑resistance state after transient event completes
‑ Weight：approx 2.8 kg
‑ Connected across generator rotor field winding. When field breaker opens for generator de‑excitation, it absorbs stored magnetic energy from rotor field winding, clamps field‑winding transient over‑voltage within safe limit, prevents rotor insulation breakdown.
‑ Withstands repetitive high‑energy impulse during de‑excitation events, provides reliable over‑voltage suppression for generator excitation loop.
‑ Pure passive power component, no internal electronic circuit; performance depends on non‑linear characteristic of silicon‑carbide resistance discs.
‑ Cannot run independently; must be matched with generator field breaker and excitation power unit. ZB9411015 belongs to legacy excitation spare‑part, replace only with identical part‑number assembly.
‑ Passive component without self‑diagnosis function. Health status needs visual inspection and resistance measurement on site.
‑ Degradation or damage will lead to insufficient over‑voltage‑suppression capability; severe failure may result in rotor winding over‑voltage insulation damage during generator de‑excitation.
‑ Bolt‑type main terminals: connect in parallel to generator rotor field winding terminals.
‑ Mounting bracket: fixed inside excitation cabinet.
‑ Mounting：cabinet internal fixed‑bracket installation
‑ Operating Temperature：‑40 ℃ ~ +60 ℃
‑ Storage Temperature：‑40 ℃ ~ +70 ℃
‑ Relative Humidity：5‑95 %RH, non‑condensing
‑ Protection Class：IP20, for cabinet‑inside installation.
- METROSIL ZB9411015 non‑linear surge suppression resistor
Complementary parts: generator field breaker, rotor field winding, excitation cabinet mounting hardware, connecting bus‑bars / cables.
‑ Disconnect all high‑voltage power before installation or replacement. Ensure firm bolt‑terminal torque, poor contact will cause local over‑heating and burning damage.
‑ Keep sufficient insulation clearance between resistor stack and cabinet metal structure.
‑ For spare‑part replacement: verify full part number ZB9411015; check disc appearance for crack, carbonization or burning traces; measure static resistance value according to factory documentation. Wrong‑type replacement will cause de‑excitation over‑voltage risk for generator rotor.
‑ Component damage will cause generator de‑excitation over‑voltage protection failure.
Thermal‑power and hydro‑power generator static excitation cabinets; legacy ABB / Bailey excitation system retrofit and spare‑part maintenance; industrial spare‑part for generator rotor de‑excitation non‑linear resistor unit.
- METROSIL series dedicated ZB9411015 non‑linear surge suppression resistor, for generator rotor de‑excitation energy absorption and field‑winding over‑voltage clamping protection.
- Stacked silicon‑carbide disc‑type structure, high‑energy impulse withstand capability for generator magnetic‑field energy dissipation.
- Passive component, no power supply required, high reliability for long‑term standby operation.
- Bolt‑on terminal connection, cabinet bracket fixed‑mount structure.
- Legacy excitation spare‑part, mainly applied for old‑unit maintenance replacement.
Reviews
There are no reviews yet.