Description
Technical background & performance features
Rack‑mount terminal base unit, part number NTAI05.
It provides physical wiring terminals for multi‑group analog field signals, and realizes partial signal filtering and surge suppression.
Matches with related analog input module inside Harmony control rack.
No independent main‑control function; data path relies on cooperating I/O module and rack backplane bus.
Working power is supplied through control rack back‑plane circuit.
Working environment must be non‑condensing inside control cabinet.
Spare parts need dry storage, prevent mechanical collision and static‑electric damage.
Cannot work standalone. Must pair with corresponding analog input module and complete rack framework. Hot‑swap under powered condition is not supported.
Typical application scenarios
Mainly deployed in thermal‑power plant auxiliary control cabinets and chemical‑industry process‑control DCS setups.
It undertakes wiring docking for flow, pressure, temperature transmitter analog signals, building signal channel between field instruments and DCS control modules.
On‑site installation points to note
Power off the related rack before installation or removal work.
Take anti‑static protective measures when handling terminal hardware.
Secure the unit in correct slot position to ensure reliable backplane contact.
Arrange field analog signal cables separately from high‑power power‑cables to reduce electromagnetic interference.
Check terminal and circuit board for scratch or component abnormality before power‑on.
Complete field wiring according to site drawing requirements.
After power‑on, perform channel signal checking one by one.
Maintain good cabinet ventilation, long‑term high temperature will accelerate ageing of protective components.
Common on‑site phenomena and analysis ideas
No response of whole signal channel group: Check rack back‑plane power supply, terminal unit contact state or internal circuit damage.
Individual channel reading abnormal: Investigate field transmitter status, wiring open‑circuit / short‑circuit, terminal screw loose contact.
Signal value jitter intermittently: Usually caused by poor cabinet grounding, cable crosstalk or cabinet over‑temperature.
Communication abnormality between terminal unit and upper module: Confirm backplane contact condition and hardware matching relation.
After site surge accident: Replace NTAI05 terminal unit, and inspect matched analog input module for secondary damage.
Reviews
There are no reviews yet.