Description
Display: 15‑inch TFT‑LCD color screen, resolution 1024 × 768 pixels (XGA), 64 k colors, CCFL backlight, typical backlight lifetime >35000 hours at 25 ℃.
Operation: 4‑wire analog resistive touch screen, touch lifetime ≥ 1 million operations.
Processor: 400 MHz RISC processor.
Memory: 128 MB flash memory, 128 MB SDRAM; battery‑backed real‑time clock and recipe‑data storage area; CF‑card slot for external storage expansion.
Power supply: 24 V DC (20‑30 V DC), reverse‑polarity protection, maximum power consumption 20 VA.
Communication interfaces: Dual 10/100 Mbps RJ45 Ethernet ports, dual serial ports (RS232, RS422/485), 1×USB 1.1 host port.
Protection rating: Front panel IP66 (valid with correct gasket and cabinet installation), rear side IP20.
Operating temperature: 0 ℃ ~ +50 ℃ vertical mounting; 0 ℃ ~ +40 ℃ horizontal mounting; storage temperature: −20 ℃ ~ +70 ℃; humidity 5‑85 %RH non‑condensing.
Mechanical data: Die‑cast powder‑coated aluminum housing; cabinet cut‑out dimension 398 mm × 304 mm; net weight approx 3.7 kg; certifications: CE, UL/cULus, DNV marine approval.
Real‑time process graphic visualization, numeric value, bar‑chart and status‑indicator display. Multi‑level user password access management, alarm and event logging, historical trend curve display, recipe storage and download. Multi‑language text support and offline simulation function are available within Panel Builder 800 software. Optimized for native System 800xA object‑oriented communication.
Difference compared with PP845: PP865 adopts larger 15‑inch XGA display; PP845 is 10.4‑inch panel. Both belong to Panel 800 series for System 800xA DCS. PP865A is updated hardware revision of PP865.
Cabinet flush‑mount installation. Confirm cabinet cut‑out dimension complies with mechanical drawing and fit front‑panel sealing gasket properly to guarantee IP66 front‑panel protection. Separate signal cables from high‑power cables to reduce electromagnetic interference. After panel replacement, download complete HMI application project, verify Ethernet communication with AC 800M controller and normal process‑data display. Periodically replace internal backup lithium battery (CR2450) to prevent RTC clock and recipe‑data loss.
Power‑plant control rooms, pulp‑and‑paper mills, chemical plants and general process‑industry facilities, deployed as local operator panel for on‑site process monitoring and parameter adjustment under System 800xA DCS system.
- ABB Panel 800‑series 15‑inch resistive‑touch operator panel for System 800xA DCS environment.
- Dual‑Ethernet ports for redundant‑capable controller communication, plus dual‑serial, USB and CF‑card expansion slot.
- Die‑cast aluminum housing, front‑panel IP66 protection, suitable for dusty and humid process‑industry environments.
- Supports alarm logging, historical trend curves, recipe management and multi‑level user‑access authority.
- Application project configured by Panel Builder 800 software; no standalone process‑control capability.
- Industrial spare‑part for maintenance and retrofitting of legacy ABB System 800xA installations.
Reviews
There are no reviews yet.