Bently 3500-25 184684-01新款 Enhanced Keyphasor Module (Latest upgraded version, PWA‑184684‑01)

Description

Hardware & Electrical Specifications

‑ Manufacturer: Bently Nevada (Baker Hughes) ‑ Compatible System: 3500‑05 full‑size 14‑slot / mini 7‑slot TSI machinery‑protection rack ‑ Functional Type: Latest‑Generation 2‑Channel Enhanced Keyphasor Module ‑ Channel quantity: 2 independent Keyphasor input channels ‑ Supported sensor: Proximity probe / magnetic pickup ‑ Input frequency range: DC ~ 20 kHz ‑ Speed measurement resolution: 0.1 RPM ‑ Typical power consumption: 3.2 W, powered by rack backplane bus ‑ Front‑panel interface: Two BNC signal input connectors; status LED indicators: OK, TX/RX ‑ Hot‑swap: Supports hot‑swap. During hot‑swap, hardware vibration protection keeps running; phase and speed data are temporarily lost. ‑ PCB Coating: Conformal coated for G3 harsh industrial cabinet environment

Environmental Specifications

‑ Operating Temperature: ‑40 °C ~ +70 °C ‑ Storage Temperature: ‑40 °C ~ +85 °C ‑ Relative Humidity: 5%‑95 % non‑condensing ‑ Vibration & Shock: Complies with API‑670 power‑plant cabinet EMC standards

Mechanical Data

‑ Dimension(W×H×D):25.4 mm ×120.7 mm ×251.5 mm ‑ Weight: approx 0.34 kg

Core Functions

1. Keyphasor signal conditioning: Receive pulse signal from shaft key‑phasor transducer, complete signal shaping and digital conversion.
2. Rack‑wide phase reference source: Distributes synchronized timing signal to all vibration and displacement monitor cards through backplane bus for phase‑angle calculation.
3. Rotational‑speed measurement: Calculates real‑time shaft rotational‑speed, provides speed value for overspeed monitoring and start‑up / coast‑down data recording.
4. Dynamic diagnostic support: Provides trigger reference for transient waveform capture, supports unit start‑stop data analysis and rotor dynamic balancing work.
5. TMR redundant expansion: Two 184684‑01 modules can be configured as primary‑backup Keyphasor source for triple‑redundant protection rack.

Installation, Replacement & Critical Warnings

1. Module supports hot‑swap; hardware protection loop remains effective during replacement; phase and speed‑related diagnostic data will be missing temporarily.
2. Compatibility warning: Drop‑in replacement for legacy 149369‑01 /125792‑01; physical dimension and pin definition are consistent. Verify rack firmware version before cross‑generation substitution; old firmware may cause abnormal phase calculation.
3. Max 2 pieces per rack (4‑channel Keyphasor). TMR‑system requires two modules for redundant key‑phasor signal input.
4. After replacement, check OK / TX‑RX LED status; download rack configuration project, verify speed reading and phase‑angle output.

5. Common failure mode: BNC input‑circuit surge damage, component aging; sensor short‑circuit may burn front‑end conditioning circuit.