Description
Hardware Specifications
- Slot Requirement: Single slot for Series 90‑30 main / expansion backplane
- Input Channels: 16 points, 1‑group single common terminal
- Nominal Voltage: 120VAC, operating range 0‑132VAC, 47‑63Hz
- Input Current: Typical 12 mA per channel; On‑state ≥6 mA, Off‑state ≤2.2 mA
- Response Time: Max 30 ms ON delay, max 45 ms OFF delay
- Isolation Rating: 1500V RMS between field wiring and PLC logic circuit
- Backplane Load: 90 mA @ 5VDC (all inputs activated)
- Status Indication: Dedicated LED for each input channel
- Ambient Condition: 0‑60°C, non‑condensing environment
- Notice: DC signals cannot be applied to this module’s terminals
Core Functions Transfers 120VAC field device on‑off status into PLC %I discrete memory registers. RC reactive input circuitry suppresses industrial‑site AC transient noise interference. Opto‑isolation separates high‑voltage field circuits from PLC internal logic hardware. Channel‑specific LED status lights deliver quick on‑site signal verification for maintenance work.
Installation Requirements Insert unit into any vacant I/O slot of Series 90‑30 rack baseplate. Route external 120VAC power for push‑buttons, limit switches or AC proximity sensors. Physically separate high‑voltage AC field wiring from low‑voltage PLC signal cables. Ensure cabinet ventilation; avoid heavy dust buildup and mechanical shock impact. Double‑check field wiring before power‑on; prohibit feeding DC voltage into input terminals.
Common Fault Modes ‑ Channel LED stays off: Missing external AC supply, open‑circuit switch or sensor wiring fault ‑ Random flickering status: Unstable AC source, loose terminal connection, heavy electromagnetic interference ‑ LED lights but PLC fails to read signal: Poor backplane contact, internal module circuit damage ‑ Multiple channels abnormal: Surge voltage damages internal isolation components ‑ Partial channel failure: Overvoltage spike burns out individual input circuit
Reviews
There are no reviews yet.